Skip to main content

Duplex 1000 Slitter Rewinder

A slitter rewinder for plastic film and laminations, with two differential shafts with central support, automatic roll extraction and a taper tension system to ensure the quality of the finished product. It runs at speeds of up to 800 m/min, in widths from 1,000 to 1,600 mm, with a rewinder diameter of up to 1,000 mm and automatic stop by length or diameter.

Dimatra Duplex 1000 Slitter Rewinder for plastic film and laminations
Max. speed
800 m/min
Max. width
1,600 mm
Rewinder diameter
1,000 mm
Min. slit width
38 mm

Materials processed

  • Cellophane
  • PET
  • PE
  • PVC
  • PETG
  • BOPP
  • BOPA
  • Laminates
  • CPP
  • Labels
  • Paper

Standard equipment

Features

  • Pivoting shaftless unwinder

    Pivoting shaftless unwinder for 3” cardboard cores.

  • Splice table

    Splice table with upper and lower press.

  • Web guide by print register

    Web guide system by print register for precise slitting on printed material.

  • Antistatic bars

    Antistatic bars included as standard equipment.

  • Razor slitting

    Razor slitting system (6 knife holders).

  • Differential rewinding

    Differential 3” shafts, each with independent drive.

  • Central support

    Central support on each rewinder shaft.

  • Automatic unloading to F support

    Automatic system for unloading the rolls to the F support.

  • Unloading lift table

    Lift table for unloading the rolls from the F support.

Parameters

Technical specifications

Reference values. Final configuration depends on your material, width and plant output.

Duplex 1000 Slitter Rewinder specifications
ParameterMetricImperial
Unwind diameter1,000 mm or 1,300 mm39” or 51”
Available widths1,000 / 1,300 / 1,600 mm39” / 51” / 63”
Rewinder diameter1,000 mm39”
Minimum slit width38 mm1.5”
Speed800 m/min2,624 ft/min
Unwinder3” pivoting shaftless—
Rewinder shafts2 differential 3” shafts with central support—
Tension controlTaper tension—
Automatic stopBy length or diameter—

Configure your machine

Options

  • Edge sensor for transparent materials
  • Shear slitting system
  • Trim extraction with collection cage
  • 6” differential shafts
  • 6” adapters for the unwinder
  • Smooth aluminum lay-on rollers
  • Manual or semi-automatic laser positioning for cores and/or knife holders
  • Splice detection sensor
  • Print counter
  • Modem for remote PLC signal diagnostics
  • OSHA and CE certifiable

Dimatra support

Services

  • Operator training
  • Installation and commissioning
  • Spare parts supply
  • Preventive maintenance
  • Remote troubleshooting assistance

Frequently asked questions

What materials does the Duplex 1000 process?

Cellophane, PET, PE, PVC, PETG, BOPP, BOPA, laminates, CPP, labels and paper.

What speed does it reach?

It runs at speeds of up to 800 m/min (2,624 ft/min), with automatic stop by length or diameter.

What is the minimum slit width?

The minimum slit width is 38 mm (1.5”).

What widths is it available in?

1,000 mm (39”), 1,300 mm (51”) and 1,600 mm (63”), with an unwind diameter of 1,000 mm (39”) or 1,300 mm (51”) and a rewinder diameter of up to 1,000 mm (39”).

What services does Dimatra offer?

Operator training, installation and commissioning, spare parts supply, preventive maintenance and remote troubleshooting assistance. With the optional modem, our team can diagnose PLC signals remotely.

Quote

Tell us about your project

Share your material type and dimensions. A specialist will contact you with a proposal for your plant.

Request a quote